PF093 · Simple power control
140W · rotary power adjustment · upright floor stand or wall mounting.
PetNF Coop Heating Guide
Radiant warmth for the resting zone inside an enclosed coop
Choose PF093 or PF143 by control style, placement and the conditions inside the coop. These panels provide localized radiant warmth—they are not room heaters designed to heat all the air in an entire coop.
Shop coop heaters ↓PF143 · Remote control
180W · three panel-surface temperature levels · 0–24-hour timer · infrared remote.
PF143 · WiFi control
180W · three panel-surface temperature levels · 0–24-hour timer · app control.
2.4GHz WiFi only.
-
PetNF PF093 Chicken Coop Heater 140 Watts Radiant Heat Chicken Heater
Regular price $49.99Regular price -
PetNF PF143 Chicken Coop Heater With WIFI, Heat Chicken Heater Energy Efficient Design
Regular price From $60.00Regular price
Compare Control & Placement
Three control choices, one important operating boundary
Use these heaters in an enclosed, insulated coop with drafts reduced as much as practical. Panel-surface temperature is not the same as coop air temperature.
Localized radiant heat: Real performance depends on ambient temperature, insulation, drafts, mounting position and how far the animals rest from the panel. Do not select a model by wattage alone.
| Model | Power & control | Panel-surface temperature | Best reason to choose it |
|---|---|---|---|
| PF093 | 140W · rotary power adjustment | Not precision temperature control; the surface may reach approximately 160°F / 70°C | A straightforward design for localized radiant warmth |
| PF143 Remote | 180W · onboard buttons + infrared remote · remote range up to about 26.25 ft / 8 m | Level 1: 122–140°F Level 2: 140–158°F Level 3: 158–176°F 0–24-hour timer | Remote adjustment without WiFi pairing |
| PF143 WiFi | 180W · onboard buttons + app | The same three panel-surface levels and 0–24-hour timer; after power returns, the heat level is retained and the timer returns to 0 hours | App control on a 2.4GHz WiFi network |
Upright floor installation
Install the supplied feet and place the heater upright on a stable surface. Fully open PF143 to 180° before installing its feet. Position it where animals cannot tip it over.
Wall mounting
Use the supplied mounting hardware and follow the model manual. Keep the front of the heating panel unobstructed. Do not cover the panel or install it in water or a wet area.
Animal-use scope: Designed for chickens, chicks and similarly managed small animals such as ducks or rabbits that need a localized warm resting zone. This collection is not presented for cats or reptiles.
Frequently Asked Questions
Five answers before choosing and installing
Will a radiant chicken coop heater warm all the air inside the coop?
No. Its primary purpose is to provide localized radiant warmth to animals and the resting zone nearest the panel. It is not a room heater designed to raise the air temperature throughout an entire coop.
What is the difference between PF093 and PF143?
PF093 is a 140W model with rotary power adjustment. PF143 is a 180W foldable panel with three panel-surface temperature levels and a 0–24-hour timer, available with infrared remote control or WiFi/app control.
Are the PF143 temperature levels the coop air temperature?
No. They are panel-surface temperature ranges. Coop air temperature and the warmth animals experience also depend on ambient temperature, insulation, drafts, distance and installation position.
Does the PF143 WiFi model work with a 5GHz-only network?
No. The WiFi model connects to a 2.4GHz WiFi network only. If a router combines both bands, make sure the 2.4GHz band is enabled during pairing.
Can the heater be covered or installed in a wet area?
No. Keep the heater, plug and electrical connections dry. Do not cover or block the front of the panel. Stop using the product if the panel, cord or electrical parts are damaged.